ValueRAM 4GB 1333MHz DDR3 Notebook Memory Module (KVR13S9S8/4) - 204-pin SO-DIMM, CL9, 9-9-9, 1.5 volts
Detalhes
f
ValueRAM 4GB 1333MHz DDR3 Notebook Memory Module (KVR13S9S8/4)
This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA compo- nents. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 204-pin SODIMM uses gold contact fingers. The electrical and mechanical specifica- tions are as follows:FEATURES
- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 667MHz fCK for 1333Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address â000â only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or
- Bi-directional Differential Data Strobe
- Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 1.18â (30mm), double sided component
Características do Produto
Brands | Kingston |
---|---|
Envio | Mais de 14 dias |
- Seja o primeiro a analisar este produto
Escreva a sua análise
Select Vendor
Price + Shipping | Condição | Seller |
---|
No questions asked yet.
Fatal error: Call to a member function getStoreLabel() on a non-object in /home/compra/public_html/app/code/local/Smartwave/Porto/Helper/Data.php on line 320